Back to Blog
32 bit slicer software6/4/2023 ![]() This model’s print head is small and compact, with the LeviQ ABL sensor built-in, making it a very neat and tidy unit. ©3DWithUs – Image: Richard Hirst Kobra Go Extruder I checked the decibel level when the printer was printing and as you can see the level was only 46 dB. The 32-bit TriGorilla gen 3.0 motherboard has fixed steppers that are silent. The Kobra Go’s motherboard and stepper motor drivers are extremely quiet, with the only noise coming from the cooling fans. PLA and TPU prints come off easily on either a smooth or textured surface, giving you a couple of options. Its textured surface makes it easy to remove prints and it provides excellent adhesion for prints, making it a popular choice for many printers. Auto bed leveling in processĪ PEI spring steel plate is a nice addition that is usually comes with more expensive printers. Unless you’re having issues or just want to double-check it between a few prints to make sure it’s still set correctly. Use post-it notes or a piece of paper to adjust the nozzle so that there is only a slight resistance between the bed and the nozzle, then save the offset. The print head will return to its original position after levelling. When LeviQ leveling begins, it uses an ABL sensor to check 25 points on the print bed. To begin printing, you must first perform an auto leveling and set your Z offset. A bonus point is that it gives beginners an idea of how things work and what is involved. It may appear intimidating, but it was very simple to put together. Finally, perform the X-axis calibration procedure, and inspect all fasteners, axis wheels, and belt tensions. After that, connect a wire harness and an x-axis limit switch to the gantry, a photoelectric switch, a baffle screen, and a filament holder. Then assemble the gantry with the XE and Z axes and install the print head and synchronous belt. Install the Z-axis profiles first, followed by the Z-axis motor backlash nut and a T-shaped screw rod. The recommended assembly process is the following. All the fastenings are in separate bags that are all numbered according to the set-up instructions which makes it very easy to pick the right ones. But as the instructions are clear, it takes approximately 1 hour to complete the assembly and the setup process of Kobra Go. The package includes a printer base, XE-axis kit, printhead, Z-axis passive block, screen kit, X-axis limit switch, X-axis tensioner, Z-axis motor, anti-backlash nut, spool rack kit, top beam, X-axis profile, 2 Z-axis profiles, T-shaped screw rod, SD card, card reader, spare nozzle, tool kit, power cord, photoelectric switch blank, and a Teflon tube cable.Ī DIY kit 3D printer, having many separate parts to assemble, may feel overwhelming and seem like it will take a long time to put together. Interface: 2.4” colour screen knob-control ![]() ![]() Materials: PLA, TPU, ABS, PETG, and otherīuild Platform: Spring steel magnetic build plate Printing Test Models – Filament ChoicesĢ5-point Anycubic LeviQ Auto-levelling System. ![]()
0 Comments
Read More
Leave a Reply. |